model paa100f-3 paa100f-5 paa100f-12 paa100f-15 paa100f-24 paa100f-48 max output wattage[w] 60 100 102 105 108 100.8 dc output 3v 20a 5v 20a 12v 8.5a 15v 7a 24v 4.5a 48v 2.1a specifications model paa100f-3 paa100f-5 paa100f-12 paa100f-15 paa100f-24 paa100f-48 input voltage[v] ac85 - 264 1 f or dc120 - 340 current[a] acin 100v 0.9typ 1.4typ acin 200v 0.45typ 0.7typ frequency[hz] 50/60 ( 47-63 ) efficiency[%] 65typ 74typ 76typ 77typ 79typ 79typ power factor acin 100v 0.99typ ( io=100% ) acin 200v 0.95typ ( io=100% ) inrush current[a] acin 100v 20typ ( io=100% )( at cold start ) acin 200v 40typ ( io=100% )( at cold start ) leakage current[ma] 0.75max ( 60hz , according to ul , csa , vde and den-an ) output voltage[v] 3 5 12152448 current[a] 20 20 8.5 7 4.5 2.1 line regulation[mv] 20max 20max 48max 60max 96max 192max load regulation[mv] 40max 40max 100max 120max 150max 240max ripple[mvp-p] 0to+50 c * 1 80max 80max 120max 120max 120max 150max -10 - 0 c * 1 140max 140max 160max 160max 160max 200max ripple noise[mvp-p] 0to+50 c * 1 120max 120max 150max 150max 150max 400max -10 - 0 c * 1 160max 160max 180max 180max 180max 600max temperature regulation[mv] 0to+50 c 50max 50max 120max 150max 240max 480max -10to+50 c 60max 60max 150max 180max 290max 600max drift[mv] * 2 20max 20max 48max 60max 96max 192max start-up time[ms] 500max ( acin 85v , io=100% ) hold-up time[ms] 20typ ( io=100% ) output voltage adjustment range[v] 2.85 - 3.6 t 10% protection circuit and others overcurrent protection works over 105% of rating and recovers automatically overvoltage protection 4.00 - 5.25v works at 115 - 140% of rating operating indication led ( green ) remote sensing provided remote on/off optional ( refer to instruction manual ) isolation input-output - rc * 3 ac3 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) input-fg ac2 , 000v 1minute , cutoff current = 10ma , dc500v 50m w min ( at room temperature ) output - rc-fg * 3 ac500v 1minute , cutoff current = 100ma , dc500v 50m w min ( at room temperature ) output-rc * 3 ac100v 1minute , cutoff current = 100ma , dc100v 10m w min ( at room temperature ) environment operating temp. , humid.and altitude -10 to +65 c , 20 - 90%rh ( non condensing )( refer to derating curve ), 3 , 000m ( 10 , 000feet ) max storage temp. , humid.and altitude -20 to +75 c , 20 - 90%rh ( non condensing ), 9 , 000m ( 30 , 000feet ) max vibration 10 - 55hz , 19.6m/s 2 ( 2g ), 3minutes period , 60minutes each along x , y and z axis impact 196.1m/s 2 ( 20g ), 11ms , once each x , y and z axis safety and noise regulations agency approvals ul60950-1 , en60950-1 , en50178 , csa c22.2 no.234 complies with den-an and iec60950-1 conducted noise complies with fcc-b , cispr22-b , en55022-b , vcci-b harmonic attenuator complies with iec61000-3-2 others case size/weight 50 x 93 x 189mm ( without terminal block )( w x h x d ) /700g max ( without cover ) cooling method convection * 1 according to 20mhz oscilloscope or ripple-noise meter(equivalent to keisoku-giken : rm101). * 2 drift is change in dc output for an eight hour period after a half-hour warm-up at 25 c , with the input voltage held constant at the rated input/output. * 3 applicable when remote on/off(optional) is added. * derating is required when operated with cover. paa100f unit type paa 100 f -5 - o ordering information 1 series name 2 output wattage 3 universal input 4 output voltage 5 optional c :with coating g :low leakage current n :with cover r :with remote on/off r 12345 paa a-52 recommended noise filter nac-06-472 high voltage pulse noise type : nap series low leakage current type : nam series * the noise filter is recommended * to connect with several devices. distribution: rsg electronic components gmbh sprendlinger landstr. 115 d-63069 offenbach/germany tel. +49 69 984047-0 fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de ?nderungen vorbehalten / subject to change without notice
? harmonic current (paa100f-5) ? efficiency (paa100f-5) ? harmoinc current (paa100f-5) ? rise time & fall time ( paa100f-5 ) dc output ac input io=100% 50ms/div acin 100v 100% 50% 78 80 76 74 72 70 68 100 60 140 180 220 260 300 load factor load factor efficiency input voltage v 01 02 03 04 0 0.01 0.001 0.1 1 10 01 02 03 04 0 0.01 0.001 0.1 1 10 load factor input voltage ac harmonic current standard class a (at odd number) 100% 100v load factor input voltage ac harmonic current standard class a (at odd number) 100% 230v harmonic order harmonic order harmonic current a harmonic current a paa a-53 paa100f external view ?cn1(connector for remote on/off) model: b2b - xh - a short piece cover name plate terminal cover name plate mounting hole mounting hole voltage adjust cover (option) led cn1 (option) 3-m4 2-m4 m4 ( 16 ) ( 28 ) ( 13.5 ) +s +v -v -s fg ac(l) ac(n) 189 20 74 45 50 10 4.5 5.5 93 ( 81 ) ( 11.5 ) 108.2 20 max 125 + - 0.5 100 + - 0.5 25 + - 0.5 37.5 22.5 12 pin no. 1 2 contents + rc - rc ?weight: 700g or less(without cover) ?cover is optional ?tolerance 1 ?mounting torque:1.2n . m(12.8kgf . cm)max mating connector(terminal) mfr: j.s.t. xhp-2(bxh-001t-p0.6 or sxh-001t-p0.6) + - o4.5 performance data distribution: rsg electronic components gmbh sprendlinger landstr. 115 d-63069 offenbach/germany tel. +49 69 984047-0 fax +49 69 984047-77 info@rsg-electronic.de www.rsg-electronic.de ?nderungen vorbehalten / subject to change without notice
|